English
中文简体
The body shell is made of high-quality nylon material. High protection level and strong anti-interference ability. Light weight, simple installation and convenient calibration. Extremely low initial flow rate reduces metering blind spots. There are no moving parts inside, which avoids the degradation of measurement performance caused by wear and ensures long-lasting and stable measurement. Using time difference method, automatic calculation, extremely accurate. Using time difference method, automatic calculation, extremely accurate. Long service life and maintenance-free.
Details
R≥250, Temperature grade: T30, Water pressure level: MAP 10Bar.
Application
Record the total amount of cold water flowing through the water pipeline (needs to be fulfilled),cannot measure sewage,water with too much bubbles and corrosive liquids.
Feature
●Almost no pressure loss when measure under common flow.
●Using internal lithium batteries,no external power supply is required.
●No mechanical movingparts inside,so no component abrasive wear and blockage problems.
●High measurement accuracy,up to 400.
●Non contact measurement,will not affected by impurities such as sands and bubbles,no electrical conductivity requirements for water.
●Low powerconsumption,ultra long standby time,with under-voltage indication and power outage protection function.
●The measurement data can be saved up to ten years.
●Supports interfaces such as RS-485,M-BUS,GPRS,wireless,etc.,enabling remote meter reading.
Installation Requirements
●Professional tools must be used for installation,the direction of the arrow being the same as the direction of the water flow.
●The pipeline must be flushed before installing the water meter.
●The water meter must be installed in a dry and easy to maintain environment,install in a dedicated meter box is recommended.
●The water meter should be installed on a pipeline with back pressure
●Try to avoid bubbles and large particles in the pipeline as much as possible.
